Text only | Text with Images

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: strungout on August 21, 2016, 08:50:28 AM

Title: Magnus Modulus-IC2 pin 4's connection to ground
Post by: strungout on August 21, 2016, 08:50:28 AM
Hey,

I'm currently re-working the Magnus Modulus layout (on page 5 of 5) so it is more perfboard friendly, but I can figure out how IC2's pin 4 connects to ground... Someone help me out? BTW IC2 is upside down.

Thanks.

EDIT: Ah, nm just found it by looking at the PCB traces! Can be hard to see traces that go under components!
Title: Re: Magnus Modulus-IC2 pin 4's connection to ground
Post by: strungout on August 21, 2016, 10:57:39 AM
I have another question, which is the rate LED? D2?
Title: Re: Magnus Modulus-IC2 pin 4's connection to ground
Post by: blackieNYC on August 23, 2016, 01:38:05 PM
I don't see a designation on the schematic, but it's the one hanging off the oscillator output where it connects to pin 6.  All other LEDS are implied to be on the 2nd pole of the "toggles" in the schematic. Built one long ago. It's great.  I don't think I got the fet tremolo to work right so I did it some other way.
Text only | Text with Images