DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Pictures => Topic started by: gtudoran on September 28, 2017, 03:36:31 AM

Title: The ParaBoost - Parametric Booster
Post by: gtudoran on September 28, 2017, 03:36:31 AM
The ParaBoost parametric booster is a one band parametric EQ with a very linear (20Hz to 22KHz) boost.
Features controls for: Frequency, Cut/Boost (freq), Q and Boost.
This clip was recorded directly into the soundcard (M-Audio FastTrack) using the ParaBoost and Orange O-bass (4 strings / standard tuning).
The ParaBoost was set for various frequencies for cut/boost and Q and in the part of the clip the Booster was set at aprox. 11 o'clock.
At the beginning and the end of the clip The ParaBoost was on bypass.
This unit is the prototype and first of its kind.
Any comments are highly appreciated and i would like to hear your opinion about it.

Regards,
Gabriel

http://soundcloud.com/dexter-gt/paraboost-parametric-booster (http://soundcloud.com/dexter-gt/paraboost-parametric-booster)

(https://s26.postimg.org/5o97gsnat/21430425_1996190873948589_5909799529820795805_n.jpg) (https://postimg.org/image/5o97gsnat/)

(https://s26.postimg.org/dtm7hu585/21558753_1996190890615254_6707904551035870799_n.jpg) (https://postimg.org/image/dtm7hu585/)
Title: Re: The ParaBoost - Parametric Booster
Post by: Ben N on January 23, 2018, 07:09:36 AM
Sounds fantastic, Gabriel, but this is a DIY board.