DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: trevize on June 08, 2006, 05:04:50 AM

Title: a layout for cicada/rambler octaver
Post by: trevize on June 08, 2006, 05:04:50 AM
hi I did the layout for the Cicada by Brett Robinson inspired by Tim's Rambler.
I built the Rambler and i had problems with notes decaying too fast with my strat (my tele with a p90 on the neck didn't had this problem) so i had the idea of adding a lpb in front of the rambler. after a search on the forum i stumbled upon the cicada, which seems even better, so i did a layout for it.

I added four solder pad to the board: j1 and j2 could be used with a switch (could be a switch between almost clean octave/scrambler ringing madness) and j3 and j4 are the pads of a capacitor (in case your pickups are not enough to push the circuit)


Could someone help me verify this? I not sure about the trimmer placement and wiring. Comments and crits are welcome!

(http://f5.putfile.com/6/15805020366-thumb.gif) (http://putfile.com/pic.php?pic=6/15805020366.gif&s=f5)

(http://f5.putfile.com/6/15805014688.gif) (http://www.putfile.com)