my first post:
can anyone explain why this is so LOUD without any of the typical fuzzy/screaming/stuttering distortion?
http://www.aronnelson.com/gallery/main.php/v/Schematics-etc/j201j177.TIF.html (http://www.aronnelson.com/gallery/main.php/v/Schematics-etc/j201j177.TIF.html)
j201
D 6.65V
S 0.316V
Vp 0.6V
j177
S 5.82V
G 6.65V
D 0.295V
thanks
Bennito
It's supposed to be loud - it's a booster! You might want to put a volume control on the end.
It's not fuzzy because there aren't any clipping diodes, which would also limit the signal and make it less loud.
butbutbut is it - transparent?
Pls note also: there's only ONE gain stage since the second stage is unity gain follower.
Quote from: DDD on April 13, 2012, 10:48:44 AM
Pls note also: there's only ONE gain stage since the second stage is unity gain follower.
Whilst it looks like one, I don't think it is....it looks like a boost to me.
without the j177 it's not even close to that loud
Quote from: R.G. on April 13, 2012, 10:45:52 AM
butbutbut is it - transparent?
runmikeyrun likes this.