Author Topic: Em-Drive Gain pot problems.  (Read 1068 times)

0 Members and 1 Guest are viewing this topic.

waynesutton83

Em-Drive Gain pot problems.
« on: February 26, 2013, 09:35:39 PM »
My first real pedal build, hence the noob question  :icon_mrgreen:.

I built the Em-Drive and when i put it into the enclosure it does not work. I figured out it has to do with the gain pot because when I take it out of the enclosure it works again. Is this pot not suppose to be grounded by the enclosure and in return shorting out or did I do something wrong somewhere? I could get it to work if I break the contact between the enclosure and the pot but I want to make sure I do it right and not take any short cuts.

Here is a link to the schematic and I can take detailed pics of the build if needed.

http://tagboardeffects.blogspot.com/2013/01/emerson-custom-guitars-em-drive.html

Thank you

pappasmurfsharem

Re: Em-Drive Gain pot problems.
« Reply #1 on: February 27, 2013, 02:19:02 AM »
Can you post some pictures with it in the enclosure?
« Last Edit: February 27, 2013, 11:55:23 AM by pappasmurfsharem »
"I want to build a delay, but I don't have the time."