Author Topic: Analogman Chorus Schematic + Mods  (Read 489 times)

0 Members and 1 Guest are viewing this topic.

POTL

Analogman Chorus Schematic + Mods
« on: October 18, 2017, 12:32:49 PM »
Hello
I'm interested in the Analogman Chorus circuit - I know that this is an EHX Small Clone circuit from the Tone Pad site, but it has minor changes, who is aware of these changes, what has Mike changed?
Also I'm interested in the following fashion
1) Mix - in the left position it is completely pure signal, in the right position it is a chorus (a variant with three modes, clean-chorus-vibrato is not interesting)
I understand that this should be in the mix section, R5 / R21 but how is it better to implement it?
As in the Boss CE-2B?
2) 2) Delay Time
As I understand it, the only option is to replace the R32 with a fixed resistor and a 100K potentiometer in the series with it?

POTL

Re: Analogman Chorus Schematic + Mods
« Reply #1 on: October 23, 2017, 10:45:16 PM »
.
« Last Edit: October 24, 2017, 09:10:14 AM by POTL »

Marcos - Munky

Re: Analogman Chorus Schematic + Mods
« Reply #2 on: October 25, 2017, 06:04:05 PM »
Before bumping your topic, you do noticed you've posted at the wrong board section, right?

Hatredman

Re: Analogman Chorus Schematic + Mods
« Reply #3 on: October 25, 2017, 07:26:09 PM »
Yes, this section is for the three forum-sponsored beginner projects.

If you want to ask for a specific schematic, go to the "Schematics and Layouts".

But you don't want to ask for a schematic, you already have it, so the best section for you is indeed "Building your own stompbox".

Repost there and you'll see hundreds of answers to every question you may ask.

Good luck!
Kirk Hammet invented the Burst Box.

POTL

Re: Analogman Chorus Schematic + Mods
« Reply #4 on: October 27, 2017, 06:19:44 PM »
OK Thanks