Author Topic: Help i need a strymon timeline aux switch shematic  (Read 110 times)

0 Members and 1 Guest are viewing this topic.

Atodovax

Help i need a strymon timeline aux switch shematic
« on: February 11, 2018, 08:19:43 PM »
Does anyone have a schematic or wiring layout, picture or information of the strymon auxiliary switch? I built the eventide timefactor aux switch using diodes but i read that this one works diferent and uses 3 resistors of different values

GGBB

Re: Help i need a strymon timeline aux switch shematic
« Reply #1 on: February 11, 2018, 08:36:47 PM »
I can't vouch for the authenticity of this, but it wasn't all that hard to find:

https://imgur.com/a/EBUjp

Comes from https://www.reddit.com/r/diypedals/comments/5qz8q3/strymon_multiswitchaux_switch_schematic_help/.

Atodovax

Re: Help i need a strymon timeline aux switch shematic
« Reply #2 on: February 11, 2018, 08:56:59 PM »
Based on that image, why do i have to use a trs jack if im shorting both t and r together, shouldnt i use a mono jack/cable?

ElectricDruid

Re: Help i need a strymon timeline aux switch shematic
« Reply #3 on: February 12, 2018, 03:15:36 PM »
Based on that image, why do i have to use a trs jack if im shorting both t and r together, shouldnt i use a mono jack/cable?

A mono cable shorts the sleeve and the ring, not the tip and the ring.

T.

Atodovax

Re: Help i need a strymon timeline aux switch shematic
« Reply #4 on: February 12, 2018, 04:28:01 PM »
Oh men, ha ha thank you