cmos dpdt [4066] pics up

[donald stringer]

1

2

3

4

Direct Link
http://img56.photobucket.com/albums/v172/troublerat/example_of_mspaint_components.jpg

http://img56.photobucket.com/albums/v172/troublerat/schematic_for_4049new.jpg
these are some drawings that I made in ms paint, using smallbears technique of drawing with pixels. The black background and white lettering is a result of having to apply an ms picture it neg. effect to the drawings so they could be seen.
http://img56.photobucket.com/albums/v172/troublerat/alt.jpg

http://img56.photobucket.com/albums/v172/troublerat/new_schem.jpg

[ExpAnonColin]

Save as GIF, not jpeg, smaller image size and no digital garbage around the boundaries of colors.

-Colin

[cd]

You can also post images at www.imageshack.us

[Lonestarjohnny]

Very Cool Donald,
       
JD

[travissk]

Cool

As for format, GIF might be better than JPEG for schematics, but my preference goes to PNG; they use the same approach as GIF and are often even smaller.

GIFs are more widely supported though, and since the last patent on them expired about a month ago, you can finally use them without fear of getting sued

[christian]

Are you using 4049 to get the inverted/non-inverted voltages for the switches?
You don´t need that, you can use one switch as inverter too, just put the voltage to the "base", resistor from one input to +Vcc(also take the inverted control voltage here) and other input to ground.
Use small resistor (10k) on the "collector" and you can put a LED in series with it for status-light!

[donald stringer]

Thanks christian I will try that on the next build and I really appreciate all the feedback from forum members. In photobucket I noticed that it excepts bmp, so that would mean you could go straight from mspaint. I am still a little foggy why I couldnt get an black lettering on white background to post. It showed up as a black square with lettering barely visible. It was two shades of black but it looks cool anyway and I might just leave it that way.