Built an Odie

Started by Danny G, October 11, 2004, 11:31:12 AM

Previous topic - Next topic

Danny G

Built an Odie the other night, can't say I like it very much.  But I think there's something wrong.  Sounds kinda scratchy and farty.  I used my DMM to tune in 4.5 v on the trimpots, but still scratchy/farty.

I may have done something wrong, I put it together real quickly.  Also had to improv a bit--had no 680K resistors, so I put 580K w/100K in series.  Also had to use a 3.3k instead of a 3k.  Can't believe I forgot so many parts when I went to the store.

I just put my Tube Reamer in a box.  That's a little kick ass number of a pedal.  Sounds much better as a stand-alone stomper than my BSIABII.  Still testing it out on my stage rig.  Sounds pretty damn good there, too!

Fret Wire

Quote from: Danny G
I just put my Tube Reamer in a box.  That's a little kick ass number of a pedal.  Sounds much better as a stand-alone stomper than my BSIABII.  Still testing it out on my stage rig.  Sounds pretty damn good there, too!

Nice ckt, ain't it. :)  Do you like how it's full gain up all the time?
Fret Wire
(Keyser Soze)

petemoore

Quote from: Danny GBuilt an Odie the other night, can't say I like it very much.  But I think there's something wrong.  Sounds kinda scratchy and farty.  I used my DMM to tune in 4.5 v on the trimpots, but still scratchy/farty.
 >>> I didn't notice any 'S & F' with my Odie build, sounds like a thing that should not be, possibly anything like a cap leaky or
I may have done something wrong, I put it together real quickly.  Also had to improv a bit--had no 680K resistors, so I put 580K w/100K in series.  Also had to use a 3.3k instead of a 3k.  Can't believe I forgot so many parts when I went to the store.
 >>>don't know where the 3k3 is or whether 3k should work, probly does, tag a 330ohm with it [series]...
I just put my Tube Reamer in a box.  That's a little kick ass number of a pedal.  Sounds much better as a stand-alone stomper than my BSIABII.  Still testing it out on my stage rig.  Sounds pretty damn good there, too!
Tube Reamer is a good one! What's the Opamp in it?
Convention creates following, following creates convention.

Danny G

A 741.  Great build!  Loud as hell, easily tweakable to your tastes.