FINISH SOME PROJECTS (PICS) AND ( SOUND ) INCLUDED

[j0shua]

GUYS :

I MADE SOME EFFECTS FROM GENERALGUITARGADGETS.COM AND RUNOFGROOVE.COM, ALSO 1 DISTORTION FROM MY DESIGN ( SCHEMATICS COMING SOON )

I BUILD :

      MXR DISTORTION+
      RODENT WHIT SOME OF MY MODS
      BIG DADDY  DIST.
      ROCKMAN DIST.  ( MODS BY ME HEHE )
      MY DISTORTION BLASTER ( I DESIGN AND MADE )
sound demo in ---------> http://www.freewebs.com/teknoblaster/blaster.mp3
pictures ----------->
http://www.freewebs.com/teknoblaster/myfuneffects.jpg

sorry but DPDT foot Switch's  ( 6 or 9 pins) are very hard to find in Dominican Republic, and hard to buy from here , so i use 1 switch
for testing , and DPDT for final project........

Enjoy!

[sir_modulus]

Hi and welcome to the forum....unfortunatley, I can't see your pedals. When I click on the link, it takes me back to this thread :shock:

Ya, If you want to make cheap Bypasses, get a SPDT switch, and wire it so that the output jack either has the circuit output going to it, or the effect output. (like in cheap wah pedal bypasses).

Good Job,

Nish

[vdm]

j0shua:
everything you've done looks nice and neat, and you can see the nice clean edges you get from a pcb as opposed to perf like me... i'll have to have a listen to the clips later though. great work!

sir mod,
if you highlight the link and paste it into another window it'll go there fine... and here i was thinking that my new browser (firefox which is great - no popups at all!) had something wrong..

trent

[jimbob]

looks like radio shack spools of wire there- Im prob wrong. Wanting to share your mods for Rodent ect? Looks great Keep it up!

[petemoore]

Cool, Nice PCBs...wish I made those tooo.
 Thanks for showing and offereing the clip !!!

[sir_modulus]

Cool Pcb's and nice clip! Dunno why my browser redirects, but when you copy/paste, it all works. Yes, that looks like Ratshack wire, and I have a question for Joshua: How'd you get the stuff printed on top of the board (silkscreen layer from Sepress PCB (hey, that's what I use too!))?

Cheers,

Nish

[Jehle]

Very clean work for such a dirty sound.  :lol:

Excellent work!

[Incubus]

How did you paint those 4 white arrows on the table without dripping paint on the wires ?

[j0shua]

1- YEAH ARE RADIOSHACK WIRES ARE NOT EXPENSIVE HEHE

2- THANKS FOR THE COMENTS

3- IM NOT PAINT THE TABLE MY FRIENDO , IM JUST GET A PICTURE WITH MY DIGITAL CAM AND PUT THE NAMES WITH PHOTOSHOP LOL!

4- THE SOUND DEMO ARE NOT RECORD ON MY GUITAR , I USE A BASS GUITAR TO DO HEHE , BUT I GOING TO RECORD WITH MY JACKSON HH FUSION SOON AS POSIBLE, I DON'T HAVE MUCH TIME , I HAVE LOT'S WORK ON MY RECORD STUDIO ....

5- THE PCB ARE ARE MADE LIKE A PROFESIONAL FINISH ...


** I WISH TO HAVE MORE DPDT SWITCHES, BUT IS HARD TO GET OR FIND HERE , IN MY BLASTER DISTORTION I GET FROM A FAILURE MORLEY WHA WHA , A FRIEND GIVE TO ME .....

BTW SDPT SWITCH ARE A MESS FOR FOOT USE ......

[j0shua]

HERE IS MY RODENT MOD

http://www.freewebs.com/teknoblaster/RODENTMOD.jpg

[/url]http://www.freewebs.com/teknoblaster/RODENTMOD.jpg


SOUND DEMO COMING SOON

[sir_modulus]

Good Good! I've been planing to build a Rat style distortion....  Now in regards to your boards....do you mean you order them? or do you apply the drawings on the upper layer (if so, how do you put the component images on?)

Cheers,

Nish

[j0shua]

sir_modulus:
       

I MADE MY OWN PCB'S , I LIKE ELECTRONICS, SINCE I WAS ABOUT 12 YEARS OLD, IM 27 NOW, BUT I HAVE LOT'S INSTRUMENT'S TO MAKE PCB'S AND ALTERNATIVE ETCHING SOLUTION MORE FASTER AND CLEAN WORK ...  70% SULFURIC ACID + 30% H2O2 ( OXIGEN WATER ) I DUNNO HOW TO SAY EN ENGLISH LOL... AFTER 10 MINUTOS YOU HAVE A GREAT FINISH WORK, BTW I USE A COMERCIAL PAINT TO PROTECT THE PCB , IN THIS CASE I USE A GREEN 1 , BUT YOU CAN BUY RED, BLACK, BLUE ETC....

AND I USE A TRANSPARENT LAYER PAPER FOR ANY ELECTRONIC ITEM ON THE PCB'S

IM UPLOAD 2 MORE DEMOS , 1 FROM MY BLASTER DISTORTION AND THE OTHER IS FROM RODENT MOD. DEMO  ( IRON MAN FROM BLACK S. )


ENJOY

[sir_modulus]

Awsome! I've seen some acid etching labs...I do all my stuff at home, and parents don't even let me bring the annomium in! (all for the good....but it sure makes my life hard...).

That's some really nice work your doing!

Congrats!

Nish

[j0shua]

I UPLOAD 2 MORE SOUND DEMOS

1- RODENT MOD DEMO ----> http://www.freewebs.com/teknoblaster/rodentmod.mp3

2- MY BLASTER DISTORTION DEMO ( NOW WITH GUITAR HEHE )
http://www.freewebs.com/teknoblaster/blaster.mp3

[j0shua]

THIS IS MY BLASTER DISTORTION SCHEMATICS ..... ENJOY AND HAPPY MOD........


http://www.freewebs.com/teknoblaster/blaster.jpg