How do i cicuit a true bypass with two fx in one box?

[samzeppelin]

i once saw a site who had it all explained but ive lost it
can i maybe do it without 3PDT switches?
they are really expensive here in sweden  

thanks
/sam

[Mike Burgundy]

For real true bypass you'll need a DPDT at least.
If the switches are impossibly expensive (smallbear will open soon and delivers internationally!) you could also employ a buffer and wire for non-true bypass with *very* little loss.
Seek out GEO and read the bypass articles there.

[d95err]

can i maybe do it without 3PDT switches?
they are really expensive here in sweden  

I live in Sweden too. Forget about getting 3PDT switches from any Swedish company, they are insanely expensive.

I recently ordered a number of 3PDT switches from Aron Nelson's site (www.diystompboxes.com). You could get 4 of them for less than a single switch would cost in Sweden, and they arrived within a week.

[Paul Marossy]

I recently ordered a number of 3PDT switches from Aron Nelson's site (www.diystompboxes.com). You could get 4 of them for less than a single switch would cost in Sweden, and they arrived within a week.

Viva diystompboxes.com!  :wink:

[RDV]

Here's a little something I contributed to GGG.
http://www.generalguitargadgets.com/pdf/two_in_one_wiring.pdf

RDV

[GreenEye]

see above - beat me to it.....check the times of the posts...down to the exact minute

[samzeppelin]

thanks a lot

[Paul Marossy]

Thanks for the link RDV, that's good info to have in case I ever want to try this sometime.