Author Topic: DOD Punkifier board pics here. What's going on?  (Read 7997 times)

0 Members and 1 Guest are viewing this topic.

brad

  • Guest
DOD Punkifier board pics here. What's going on?
« Reply #20 on: February 18, 2005, 09:59:25 PM »
I think the point of the pedal is to sound crappy!  

The distortion section is pretty much a DOD 250...so an interesting mod might be to mod it to "vintage Grey" specs.  If you wanted to get really crazy, you could split the dual opamp socket into two single opamp sockets on a small board inside the enclosure and use a 741 IC for true DOD 250 tone.  Adding a switch to select either germs or LEDs for clipping diodes wouldn't go astray either.  A switch could even be added to connect point "A" directly to the output jack and simultaneously break the fuzz output and send the open "Punk" pot lug to ground.  Instant DOD 250 output!

I've already made the first mod: a Pink indicator LED.  Now it's the DOD Pinkifier.  :o

analogguru

DOD Punkifier board pics here. What's going on?
« Reply #21 on: February 19, 2005, 03:38:16 AM »
I think you gave it the wrong name, it should be:

PINKLEFIRE

 :D

analogguru

strungout

DOD Punkifier board pics here. What's going on?
« Reply #22 on: February 19, 2005, 12:38:31 PM »
Yeah, punk is supposed to sound like sh*t, but it's been about 30 years, things change and even crap sounds like better crap now  :wink:  The fuzz feel too saturated and sounds farty to me.

My gutter rat I find better  8)
"Displaying my ignorance for the whole world to teach".

"Taste can be acquired, like knowledge. What you find bitter, or can't understand, now, you might appreciate later. If you keep trying".