SCHEMATIC OF SMASH DRIVE

j0shua · February 22, 2005, 06:06:41 PM

Hi guys, this is the new schematic made by me in expressSCH

exelent for new user , this one is the killer version....

to build the simple version just put a 500k resistor after the IC pin 5 and 1M pot.

http://photobucket.com/albums/v669/teknoblaster/?action=view¤t=SMASHDRIVE.jpg

happy build!

j0shua · February 22, 2005, 07:52:33 PM

this is the simple version :

http://photobucket.com/albums/v669/teknoblaster/?action=view¤t=SMASHSIMPLE.jpg

j0shua · February 23, 2005, 09:58:17 AM

visit the site and see all, btw are a new variant ( not tested yet )

sugestions and tips wellcome

j0shua · February 23, 2005, 01:20:11 PM

hmmm nobody interest..... well hehe

casey · February 23, 2005, 01:33:20 PM

you could put a 1k for the drive or "smash" part. as it would suffice...

good job

j0shua · February 23, 2005, 01:58:09 PM

thanks Casey , i know but im only have here 5k LOL... so someone can use many pot 1 to 5 k ... i try 10K and not work well .... im buildin now the non tested Gdrive .... so i post the sound demo today

is build at 60% .....

sug. are welcome about New Gdrive !

j0shua · February 23, 2005, 09:56:25 PM

this is the demo of the gdrive..... please copy and paste in new browser

http://www.freewebs.com/teknoblaster/gdrvtest.mp3

j0shua · February 24, 2005, 01:48:31 AM

Damm my Lm386 on Gdrive is Fried :evil: , hmmmm please can some one check what i do wrong ?

the schematic are here

j0shua · February 24, 2005, 01:31:27 PM

hmmmmm i think is on some resistor!

News:

SCHEMATIC OF SMASH DRIVE