Labeling idea?

[hairyandy]

For those doing large quantities or selling your pedals...

I just went to this link that Paul Perry (Frostwave) posted in another thread:

http://pfl.labelserve.com/

The Lexan printing options are pretty expensive (about $270 per 50 for a 1590B sized, 3-color label) but I was thinking about their bumper stickers.  A 3-color,(W)2-3/4"x(L)5" is $150 per 250.  A 1590B is (W)2.34"x(L)4.39" so you could just have them print your full-face design onto a bumper sticker, cut it out and stick it on.  I doubt that you'd even have to clear over it, although I'm sure you could if you wanted to.

Has anybody ever tried this method or one similar?

[inverseroom]

I tried printing onto glossy adhesive inkjet sticker paper, and it worked great.  It took clear lacquer nicely too.  I recommend it, but it turns out to be hard to find the stuff, and now that I've run out I can't remember where I got it...

[inverseroom]

Actually here's the pedal I put it on--it's a 4ms Atoner.  You can't really see it, but the background is a pattern of pink rose wallpaper.

[hairyandy]

Here's another online resource for stickers.  

http://www.stickerguy.com/priclist.htm

These guys have been around forever.  Depending on how crazy and complicated your design is, this could be really cheap and look great.  You can fit two full-face labels for a 1590B plus extra labeling for the sides on their 4.25x5.50 sticker.