|HOME| |DIY FAQ| |GEO FAQ| |Debugging Page| |Links| |Schematics| |Wiki| |Layouts Gallery| |STORE|
|AMPAGE| |GEOFEX| |AMZ|

Welcome, Guest. Please login or register.
Did you miss your activation email?
November 23, 2014, 01:12:25 AM
975154 Posts in 103854 Topics by 33224 Members
Latest Member: Ellemay214
Home Help Login Register
DIYstompboxes.com  |  DIY Stompboxes  |  Building your own stompbox  |  Analog/digital ground question 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Analog/digital ground question  (Read 1711 times)
DaveTV
Posts: 165

Dave S


Analog/digital ground question
« on: September 03, 2003, 07:35:51 PM »

I'm planning on building Scott Swartz' PT-80 digital delay, and I noticed the analog and digital ground symbols on the schematic. This is my first digital pedal, and I was wondering if anyone had any advice on how to wire these two ground types.
Logged
Rob Strand
Posts: 575


Analog/digital ground question
« Reply #1 on: September 03, 2003, 11:30:00 PM »

You keep the digital ground stuff separate from the analogue ground stuff and then connect the two gounds together at one point.  Think of the two ground systems as islands which meet at one point.  The last thing you want is the analog ground connections interwoven with the digital ground connections.
Logged

"If it turns out it’s like an onion with millions of layers… then that’s the way it is." — Richard Feynman
Paul Perry (Frostwave)
Posts: 7470

Paul P.


Analog/digital ground question
« Reply #2 on: September 04, 2003, 03:17:00 AM »

And you would want to keep the analog and digital + upplies separate a well, and connect right at the regulator (or whtevre the power source is).
The idea is to have no power or ground currents flowing in common traces.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to: