TS less more mod question

[dansamp]

need help locating the 51k and 4.7k resistors for the less/more distortion mod on my TS5
could some one please let me know which resistors to replace??

thanks ........

[Fret Wire]

I haven't seen a ts-5 shematic with the factory component numbers, but use the ts-5 schematic on this link to identify their location (off the drive pot), and trace them out on your board. I once posted a TS-9 pic with all the mods marked out, but never did it with the ts-5. Same ckt, different board placement.

Remember, if you want identical bass response with "more" part of the mod, double the .047 cap value to .1uf when you halve the 4k7 resistor. Around 20k is good for the "less" mod.

http://www.planeteleven.net/tubescrmr/ts5mods_graphic.jpg

http://www.planeteleven.net/p11-amp.htm

http://bryant02.home.att.net/schematics/TS5.gif

http://www.geofex.com/Article_Folders/TStech/tsxtech.htm

[dansamp]

got it
thanks.......