What to build next? rev.II

Started by Steben, October 04, 2005, 04:39:35 AM

Previous topic - Next topic

Well I almost tweaked the Ph45: what now?

BSIAB II
1 (14.3%)
Axis Fuzz
0 (0%)
Hey, you started modulating: try the phase 90 !
0 (0%)
Finish your tube amp first dude...
4 (57.1%)
little 386 amp perhaps?
0 (0%)
other...
2 (28.6%)

Total Members Voted: 7

Steben

If you think of this as a hassle, let me know. The Phase 45 was the chosen one by you guys so I did it. Only some tweaking to do, but I'm allready fond of this medium effort -> good rewards project. It's a very good DIY idea for people who are "beyond the fuzz face"  :D.
What next?
  • SUPPORTER
Rules apply only for those who are not allowed to break them

MartyMart

My "other" vote goes for a Univox superfuzz !
Take the schemo and "lay one out" on perf/stripboard
Great circuit and a nice little challenge !!
I guarantee you WONT be sorry  :D
Marty.
"Success is the ability to go from one failure to another with no loss of enthusiasm"
My Website www.martinlister.com

Steben

I dunno Marty,

I know the superfuzz by ear. It's tooooo much transistor buzz for me. I'ld rather build a maestro FZ1 then. It's more "aggressive" than it is "nasty". With the univox it is the other way around.
  • SUPPORTER
Rules apply only for those who are not allowed to break them