|
Author
|
Topic: New Effect: Payback (Read 38513 times)
|
|
TheAttackman
Posts: 4
|
sorry to be a pain.. but i read through everything and i cant tell exactally which layouts are confirmed  could someone help me out thanks  |
|
|
|
|
Logged
|
|
|
|
|
abakuzam
Posts: 12
|
Hello everyone, I posted a new effect called Payback at the site. It is a looping sampler with a host of features. There is article explaining it's operation and several modification suggestions. Enjoy. The Tone God's DomainOh and about that little challenge:  how can i disable multiple recording on paybackv1? thanks   Happy Canada Day to all my fellow Canadians. Happy 4th of July to all my brothers and sisters to the south as well. Your Tone God, Andrew |
|
|
|
|
Logged
|
|
|
|
|
Jaicen_solo
Posts: 1068
|
When I'm back on a pc, not iPhone, I'll look up the schem, but if i remember correctly, it really is as simple as tying the address pins to ground.
|
|
|
|
|
Logged
|
|
|
|
|
abakuzam
Posts: 12
|
When I'm back on a pc, not iPhone, I'll look up the schem, but if i remember correctly, it really is as simple as tying the address pins to ground.
thanks a lot , don't forget  |
|
|
|
|
Logged
|
|
|
|
The Tone God
Global Moderator
Posts: 5265
Linda
|
Yep. All the loop number switch does is set the address pins to the right value for roughly half the memory location to start from. Setting them all to ground starts from the beginning.
Andrew
|
|
|
|
|
Logged
|
|
|
|
|
abakuzam
Posts: 12
|
Yep. All the loop number switch does is set the address pins to the right value for roughly half the memory location to start from. Setting them all to ground starts from the beginning.
Andrew
a2,a3,a5,a8 pins directly to ground right? it will give me 60 sec loop? my english not good , i did'nt understand well , sorry. and, do you have verified pcb layout for v.1? i saw very tight pcb layout for v1 in earlier posts. is it verified? thanks a lot |
|
|
|
|
Logged
|
|
|
|
The Tone God
Global Moderator
Posts: 5265
Linda
|
a2,a3,a5,a8 pins directly to ground right? it will give me 60 sec loop? my english not good , i did'nt understand well , sorry.
and, do you have verified pcb layout for v.1? i saw very tight pcb layout for v1 in earlier posts. is it verified? Yes connect all the address pins (A0-A9) to ground. I don't have a verified PCB layout myself but there ones out there. Good luck!  Andrew |
|
|
|
|
Logged
|
|
|
|
|
abakuzam
Posts: 12
|
a2,a3,a5,a8 pins directly to ground right? it will give me 60 sec loop? my english not good , i did'nt understand well , sorry.
and, do you have verified pcb layout for v.1? i saw very tight pcb layout for v1 in earlier posts. is it verified? Yes connect all the address pins (A0-A9) to ground. I don't have a verified PCB layout myself but there ones out there. Good luck! Andrew thanks, i found this layout http://www.mediafire.com/?cobl8lxkqfr61gvit seems right to me what do you think? |
|
|
|
|
Logged
|
|
|
|
|
|
