Thor @ 18V ! ! !

Started by alderbody, March 19, 2007, 04:02:13 AM

Previous topic - Next topic

alderbody

I ran my Thor @ 18 Volts, without changing anything in the biasing trimpots.

As you might have already guessed it sounds clearer and more "headroomy".

I found the tone very interesting, and in some cases quite "dirty-Fendery"...

Why make a marshall-like pedal sound more to the fender side?... 

Well,   ...why not?    :icon_mrgreen:

Listen and you will understand:

http://www.diystompboxes.com/userfiles/index.php?&direction=0&order=&directory=public_downloads

Clean_Thor18V_Thor9V.mp3    From clean to 18V and back to 9V. (Full gain)

Thor18V_reso_br.mp3       Pure 18V pushed by my resonance pedal.

Thor18_Lenny.mp3      Very clean but biting sound.

John Lyons

I've been meaning to run higher voltages into the FET circuits as well.
You should adjust the bias(s) and see what you get as well.
Clips sound good!

John
Basic Audio Pedals
www.basicaudio.net/

alderbody

Quote from: Basicaudio on March 19, 2007, 11:45:50 AM
I've been meaning to run higher voltages into the FET circuits as well.
You should adjust the bias(s) and see what you get as well.
Clips sound good!

John


hey John, thanks!

The re-biasing would be very interesting indeed, but i liked the sound like that,
so i spent all my playing time without opening the box for a "deeper digging"...   :icon_mrgreen:

I guess that's one of the future projects.

John Lyons

Yeah, stay with what sounds good.
I tried 18v for the Dr boogie but I didn't get much difference there. A lot of gain there... it's not as noticeable.
The thor clips sound good at 18v so other than experimentation I'd stay where you are with the 9v bias as well!

John

Basic Audio Pedals
www.basicaudio.net/

alderbody

Quote from: Basicaudio on March 20, 2007, 12:35:33 PM
Yeah, stay with what sounds good.
I tried 18v for the Dr boogie but I didn't get much difference there. A lot of gain there... it's not as noticeable.
The thor clips sound good at 18v so other than experimentation I'd stay where you are with the 9v bias as well!

John



Exactly!  8)