AMZ FX ANALOG ALCHEMY GEOFX MEF ROG DIY WIKI

Peavey Envoy 110 PT

Started by stutter, March 30, 2007, 07:44:43 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

stutter

March 30, 2007, 07:44:43 AM
I was wondering if i could use this PT for the LM3886 amp at GGG.It says it puts out 16.7v RMS and the GGG amp asks for a 18v Bipolar power supply.Would this work?

petemoore

#1
March 30, 2007, 10:05:45 AM Last Edit: March 30, 2007, 10:07:18 AM by petemoore
  I was wondering if i could use this PT for the LM3886 amp at GGG.It says it puts out 16.7v RMS and the GGG amp asks for a 18v Bipolar power supply.
     Not completely sure what you have there, but a transformer, center tapped secondary, is needed.
  I guess 16.7 on either side of ground reference [+/- 16.7vdc] would do 'well' but not quite full volume.  Just don't quote me...lol.
Convention creates following, following creates convention.

stutter

#2
March 30, 2007, 11:08:22 AM
Is there anyway i can find out what each wire is.I have two red ones and a red with yellow.Plus warpped in some type of insulation is a grey a black and a white.Its made by Basler Electric Co and has a serial number...do you think i would find out about it if i googled?
Print
Go Up Pages1
User actions