Stimped for Name..

[inquebass]

I am looking for the official name(or better yet link to schematic) for a clean/wet signal mixer. I'm not sure if there is only one, or if there is a variety, but I just need to be able to mix the clean/dirty signal going into my amp. I doubt it makes a difference, but I play bass, but the changes to the schematic are fairly easy.

Any help/tips/info?

Thanks

[Pushtone]

There is a few....

The B Blender
http://seanm.ca/stomp/bblender.html

Run Off Groove's Splitter Blender
http://www.runoffgroove.com/splitter-blend.html

And my personal favorite by our own friend and co-forumite, Any Machine
a slightly different take on the ROG Splitter Blender
http://www.aronnelson.com/gallery/v/ANY-machines/album47/



On the commercial side I see that Radial (makers of those Tonebone pedals)
is making one they call the Big Shot MIX.
www.tonebone.com
(We buy a ton of their DI's so I thought I'd give them a plug) 

[inquebass]

Thank you sooo much. For some reason I just could not remember the "official name" and after a few hours of searching decided to ask. Wow, I looked through runoffgroove, now i feel dumb.

Oh well. I'm liking the B blend for the simplicity, and the fact that I can steal the op-amps from my pedal carcasses, and the wall wart from anything under 24v, which makes sense, because I'm running 18v pickups.

A few questions:I don't see a 9v-. I'm guessing it gets grounded?
Almost any opamp will work.....I don't like my luck with that one....

Any other tips/potential problems you see?

[Joe Viau]

I've heard good stuff about Moosapotamus' Paralooper:

http://moosapotamus.net/THINGS/paraloop.htm