Author Topic: Voodoo Vibe with low to no output  (Read 515 times)

0 Members and 1 Guest are viewing this topic.

mosrite1

Voodoo Vibe with low to no output
« on: January 02, 2008, 11:10:40 PM »
I have an older Voodoo-Vibe and it only has output and no output when the pedal is engaged. Have this problem with other pedals before it has always been the switch, so I replaced it,  but it didn't help, I have also tried new input and output jacks and of course a  fresh 9volt, and still nothing, what else could be the problem ?

 

Thanks

 

R.G.

Re: Voodoo Vibe with low to no output
« Reply #1 on: January 03, 2008, 04:16:39 AM »
Quote
what else could be the problem ?
Practically anything else inside the pedal.

You're going to need the schematic for the pedal, a voltmeter, and an audio probe setup. The general debugging is going to be to put in a signal, then follow it along the signal path through the circuits until it disappears. When it disappears, you're just past where the fault is that is keeping signal from flowing.
R.G.

The music world seems to be a three-way race between the princess and the pea, the blind men and the elephant, and the emperor's new clothes.