Author Topic: Echoplex preamp  (Read 1950 times)

0 Members and 1 Guest are viewing this topic.


Echoplex preamp
« on: April 26, 2008, 04:41:45 PM »
I'd like to build an ep-3 preamp as a stand alone pedal. I'm sure I can build it off just a schematic but i'd like some help in finding where the preamp stops and goes into the delay circuit.

It seems simple, just 1 fet. I'm thinking the preamp is everything between input and output without going past the circled 10 or 23 on the schematic. Please let me know if this is correct.