Foxxx Phaser Presence Issue

[aumnix_1]

About 2 months ago I got a Foxxx Phaser made by Nick James. Just for context, I am using an Omega FET booster which basically has an internal bias bot that can change the frequencies at which it boosts (can go from a treble boost at 7v and full range boost at 4v) I am using an amp sim of a JTM45 and the booster sounds good. I started using the Foxxx phaser and I notice it really takes away the gain and the treble. I'm pretty sure it's a presence issue, is this some resistor that is causing this. I don't mind the hiss it causes because it's honestly not that bad since the FET booster doesn't hiss really at all.

Strat--->Omega Booster--->Foxxx Phaser--->Amp Simulator

[nickbungus]

Hi.  Its Nick (James)

I'm not familiar with the fet Booster you use.  Do you have any issues with a standard treble boost or no booster at all?

[nickbungus]

Ah, its the Omega is from Run off Groove

http://www.runoffgroove.com/omega.html

[aumnix_1]

Oh hey Nick, I just didn't want to have to keep bothering you about this and see if anyone else had an answer. I have the booster set as a treble booster with a little low end added on to it. But even without the booster it still darkens the tone noticeably.