Author Topic: Can we start a Demo Video Thread?  (Read 165568 times)

0 Members and 1 Guest are viewing this topic.

Slade

Re: Can we start a Demo Video Thread?
« Reply #100 on: December 05, 2010, 01:03:17 PM »
Here's the first video of the Classic Germanium Fuzz. It's with an SS amp, I'll upload soon another one with a tube amp.

http://www.youtube.com/watch?v=R1h94lat41w

Regards,
Fernando.-

arma61

Re: Can we start a Demo Video Thread?
« Reply #101 on: December 05, 2010, 02:19:03 PM »

well done "3hands man" !  :D  :D




is there a way to DIY a guitar player like that, so we can set up/test our FXs " on the fly"........?  :D  :D  :D


"it's a matter of objectives. If you don't know where you want to go, any direction is about as good as any other." R.G. Keen

mikemaddux

Re: Can we start a Demo Video Thread?
« Reply #102 on: December 08, 2010, 05:25:15 AM »
great to see this thread still going.....subscribing to all you guys so I can see your new stuff

www.youtube.com/goodfreshie
Completed Builds: A lot...

deadastronaut

Re: Can we start a Demo Video Thread?
« Reply #103 on: December 08, 2010, 11:02:50 AM »
my latest creation...not built yet!...but hey..these things take time.. :icon_rolleyes:

introducing....(trumpets and a drum roll).......'PULSEWAH'

enjoy...

http://www.youtube.com/user/100roberthenry#p/u/0/SEPIKOnpiNE
http://www.youtube.com/user/100roberthenry
http://deadastronaut.wix.com/index
https://deadastronaut.wixsite.com/effects

^ SPACE PATROL FUZZ/ NANO-8 MIDI DRUMS /CHASM REVERB / TREMSHIFTER / FAZE FILTER/ABDUCTOR II DELAY pcb's + WAH LIGHT PLATES. and sausa

Steve Mavronis

Re: Can we start a Demo Video Thread?
« Reply #104 on: December 08, 2010, 11:28:48 AM »
I just got word (from the guitar player) after finding this video posted on youtube that my 250 overdrive pedal DIY clone is being used on this clip! It's the closest to a demo that I can provide right now:

http://www.youtube.com/watch?v=Mivy7vihICs
Guitar > Neo-Classic 741 Overdrive > Boss NS2 Noise Suppressor > DOD BiFET Boost 410 > VHT Special 6 Ultra Combo Amp Input > Amp Send > MXR Carbon Copy Analog Delay > Boss RC3 Loop Station > Amp Return

deadastronaut

Re: Can we start a Demo Video Thread?
« Reply #105 on: December 08, 2010, 11:39:03 AM »
very cool steve...sounds f****g awesome.... :icon_eek:

he should have showed off  ya pedal though man....nice...
http://www.youtube.com/user/100roberthenry
http://deadastronaut.wix.com/index
https://deadastronaut.wixsite.com/effects

^ SPACE PATROL FUZZ/ NANO-8 MIDI DRUMS /CHASM REVERB / TREMSHIFTER / FAZE FILTER/ABDUCTOR II DELAY pcb's + WAH LIGHT PLATES. and sausa

Steve Mavronis

Re: Can we start a Demo Video Thread?
« Reply #106 on: December 08, 2010, 12:36:20 PM »
This clip is supposed to be part of an instructional video being filmed called "Learn to Burn" so hopefully he will show it but I don't know.
« Last Edit: December 08, 2010, 12:42:28 PM by Steve Mavronis »
Guitar > Neo-Classic 741 Overdrive > Boss NS2 Noise Suppressor > DOD BiFET Boost 410 > VHT Special 6 Ultra Combo Amp Input > Amp Send > MXR Carbon Copy Analog Delay > Boss RC3 Loop Station > Amp Return

Pigyboy

Re: Can we start a Demo Video Thread?
« Reply #107 on: December 10, 2010, 01:45:01 PM »

Rose playing her new Taylor thru the Little Angel
http://www.youtube.com/watch?v=tsbcD4txfZg
And you'll have to admit, I'll be rich as shit
I'll just sit and grin, the money will roll right in....
                                                            - FANG

jkokura

Re: Can we start a Demo Video Thread?
« Reply #108 on: December 10, 2010, 05:32:23 PM »
Posted video today!

Chorus ensemble from Madbean's Pork Barrel project

http://www.youtube.com/watch?v=X7F-BYgQmGk

Aristocrat from Madbean's Aristocrat project

http://www.youtube.com/watch?v=PMUX1GZ5cHw

Jacob
« Last Edit: December 10, 2010, 06:28:44 PM by jkokura »

FlyingZ

Re: Can we start a Demo Video Thread?
« Reply #109 on: December 11, 2010, 12:42:12 PM »
I demo'd the Guild for a friend but after 9:28 it could be a Dr Boogey demo on a crappy tele.

http://www.youtube.com/watch?v=P_2Vxq_CTLw

cloudscapes

Re: Can we start a Demo Video Thread?
« Reply #110 on: December 13, 2010, 12:52:00 PM »
~~~~~~~~~~~~~~~~~~~~~~
{DIY blog}
{www.dronecloud.org}

FlyingZ

Re: Can we start a Demo Video Thread?
« Reply #111 on: December 13, 2010, 02:46:12 PM »
That would be good for video game robot soundtracks.

darron

Re: Can we start a Demo Video Thread?
« Reply #112 on: December 17, 2010, 04:51:26 AM »
analog bit crusher breadboard demo. at the end of the video i show the effect with a sine wave through the scope.


http://www.youtube.com/watch?v=GxkLt6R-iXQ
« Last Edit: December 17, 2010, 04:57:35 AM by darron »
Blood, Sweat & Flux. Pedals made with lasers and real wires!

Top Top

Re: Can we start a Demo Video Thread?
« Reply #113 on: December 17, 2010, 10:12:26 PM »
analog bit crusher breadboard demo. at the end of the video i show the effect with a sine wave through the scope.


http://www.youtube.com/watch?v=GxkLt6R-iXQ


Is that basically amplitude modulation? Sounds more or less like a ring modulator, but with more of the original signal and carrier getting through.


http://www.youtube.com/watch?v=TRflDaVqfuQ

That's wild.

zambo

Re: Can we start a Demo Video Thread?
« Reply #114 on: December 18, 2010, 02:19:21 AM »
its not really a pedal but its a demo of what i been up to latley    http://www.youtube.com/watch?v=sETbe24Bu-4   :)
I wonder what happens if I .......

John Lyons

Re: Can we start a Demo Video Thread?
« Reply #115 on: December 18, 2010, 03:04:45 AM »
That sounds great Greg! Nice work.
Basic Audio Pedals
www.basicaudio.net/

zambo

Re: Can we start a Demo Video Thread?
« Reply #116 on: December 18, 2010, 03:12:08 AM »
Hey Thanks! I should have the 10 watt version done tomorow or the next day. I cant wait to hear an el34 in this design. I got a better layout going to so hopefully less buzz and oscillation....fingers crossed....
I wonder what happens if I .......

darron

Re: Can we start a Demo Video Thread?
« Reply #117 on: December 18, 2010, 04:03:58 AM »
Is that basically amplitude modulation? Sounds more or less like a ring modulator, but with more of the original signal and carrier getting through.

wouldn't amplitude modulation be a tremolo? no, it's a sample and hold. there are two buffers with a fet switched by a really fast clock in the middle. when it's switched off a small capacitor holds the signal where it was which is held by the buffer. this in effect makes the wave have a ladder and sound like a low bitrate digital signal (atari)
Blood, Sweat & Flux. Pedals made with lasers and real wires!

Top Top

Re: Can we start a Demo Video Thread?
« Reply #118 on: December 18, 2010, 04:57:27 AM »
Is that basically amplitude modulation? Sounds more or less like a ring modulator, but with more of the original signal and carrier getting through.

wouldn't amplitude modulation be a tremolo? no, it's a sample and hold. there are two buffers with a fet switched by a really fast clock in the middle. when it's switched off a small capacitor holds the signal where it was which is held by the buffer. this in effect makes the wave have a ladder and sound like a low bitrate digital signal (atari)

Ok I'm familiar with S/H circuits from synths.  So then the more frequently the sample and hold samples, the greater the number of amplitude levels it is representing, similar to the number of amplitude levels represented by different bit resolutions in digital audio... just that in this case, they are probably not fixed to exact corresponding fixed amplitude depths/voltages, like they would be in digital.

I can see how that would work.

darron

Re: Can we start a Demo Video Thread?
« Reply #119 on: December 18, 2010, 06:24:27 AM »
Is that basically amplitude modulation? Sounds more or less like a ring modulator, but with more of the original signal and carrier getting through.

wouldn't amplitude modulation be a tremolo? no, it's a sample and hold. there are two buffers with a fet switched by a really fast clock in the middle. when it's switched off a small capacitor holds the signal where it was which is held by the buffer. this in effect makes the wave have a ladder and sound like a low bitrate digital signal (atari)

Ok I'm familiar with S/H circuits from synths.  So then the more frequently the sample and hold samples, the greater the number of amplitude levels it is representing, similar to the number of amplitude levels represented by different bit resolutions in digital audio... just that in this case, they are probably not fixed to exact corresponding fixed amplitude depths/voltages, like they would be in digital.

I can see how that would work.

that's right. in fact it seems whenever the circuit is mentioned people jump in to remind that it is not true bit crushing, as you pointed out there's infinite number of amplitude depths and the levels are not fixed. the sound is still right. it's simple and fun but not sure how practical this would be for use without further development removing the noise.

the schematic is here but i had to modify the values to get it working: http://experimentalistsanonymous.com/diy/index.php?dir=Schematics/Fuzz%20and%20Fuzzy%20Noisemakers
Blood, Sweat & Flux. Pedals made with lasers and real wires!