Here's my latest - TS808 with a few mods (mainly of the Keely variety). WARNING: PICS BELOW NOT (OVERLY) SAFE FOR WORK
Most important mod though (IMO) is the addition of a 6-way rotary switch (labeled "NASTY") for clipping diodes - just gives you so many tonal possibilities. I went for Ge (sym), Ge (asym), Si (sym, stock), Si (Asym), LED and fully lifted.
- LED is probably my favourite - nice n' gritty, although the lifted setting gives a massive amount of boost if that's your thing.
- Ge is much quieter (as you'd expect) and you need to push the Level ("BUMP") all the way up, but both settings give a lovely rounded OD.
Quite usable tonally, def. moreso than my standard TS808... Perspex LED glowing border in lieu of a normal LED on top, just cos :biggrin: Wish I was keeping this one, but it's an Xmas gift for the guitarist in our band...
My first crack at etching an enclosure - some bits worked really well, others not so. Next time, I need to sand the enclosure more to remove the blemishes from the enclosure casting, and also mask the big flat areas with lacquer as there were a few spots where the FeCl was just starting to go through the mask... But overall, very pleased for my first effort.