Author Topic: 'LIGHTWAH'  (Read 113845 times)

0 Members and 2 Guests are viewing this topic.

~arph

Re: 'PULSEWAH'
« Reply #60 on: March 10, 2011, 03:16:00 AM »
perhaps a good idea to have two versions?

I'll see if I can get a schematic and layout going too.. (with my mods included)

ronnie

Re: 'PULSEWAH'
« Reply #61 on: March 10, 2011, 03:33:28 AM »
I guess what I'm trying to say is, in the Diy layout creator program their are 3 views to choose from
under board properties, Stripboard, perfboard and Pcb, The current picture above is perfboard,
I was asking if we could see the perfboard image which shows all the traces and the
Pcb image so we could print and make the circuit, hope this makes sense,

ronnie

Re: 'PULSEWAH'
« Reply #62 on: March 10, 2011, 03:36:48 AM »
ooops, I meant,  the Picture above is Stripboard,

I wanted to see the perfboad and pcb images as well if possable

tasos

Re: 'PULSEWAH'
« Reply #63 on: March 10, 2011, 03:43:09 AM »
@arnoud... :icon_eek:

This way we only need a single TL074  :icon_biggrin: and a transisor.


if it works as good you can post a schematic! ;)

ronnie

Re: 'PULSEWAH'
« Reply #64 on: March 10, 2011, 03:46:56 AM »
Hi ronnie,

There is no other layout then this vero layout.
As for the traces,

The horizontal lines are connected (labled with the letters a,b, c etc. )

I guess what I'm trying to say is, in the Diy layout creator program their are 3 views to choose from
under board properties, Stripboard, perfboard and Pcb, The current picture above is Stripboard,
I was asking if we could see the perfboard image which shows all the traces and the
Pcb image so we could print and make the circuit, hope this makes sense,

~arph

Re: 'PULSEWAH'
« Reply #65 on: March 10, 2011, 03:50:27 AM »
No it is not three views on the same layout.. you need to create the layout for each view if you want.
Currently there is only a layout made for stripboard. You can't view this as perf or pcb by just changing the board type.
There is no perf or pcb layout made yet.

Valoosj

Re: 'PULSEWAH'
« Reply #66 on: March 10, 2011, 03:50:52 AM »
cheers hhe, i'll take a look.....i feel a steep learning curve heading my way!.... :icon_rolleyes: :icon_wink:



Robert, I strongly recommend diptrace. It's an awesome program with barely any learning curve. I did make my own library with the necessary components, but other than that it's been nothing but fun with this program. I have tried eagle, DIYLC and such, but this really is the best thing since sliced bread.
Quote from: frequencycentral
You squeezed it into a 1590A - you insane fool!  :icon_mrgreen:
Quote from: Scruffie
Well this... this is just silly... this can't fit in a 1590B... can it? And you're not even using SMD you mad man!

sundgist

Re: 'PULSEWAH'
« Reply #67 on: March 10, 2011, 04:05:31 AM »
Nice...

I've got a Morley classic wah which I've modded and added selectable pre or post distortion. There's still some room left in the enclosure for a LFO on an extra bit of board. Hmmm... just need to find some space for the knobs.

deadastronaut

Re: 'PULSEWAH'
« Reply #68 on: March 10, 2011, 05:06:07 AM »
@ronnie, thats vero for ya!.i had a go at making the vero pcb, but the way its laid out there would be a few horrible jumpers and its wide too.....we'll get there in the end ok.... :icon_wink:

@tasos.its the 1590b..i was thinking of!..nice and small and board friendly...(and mainly because ive etched 2 boxes.. :icon_rolleyes:

the inner dimensions..55 mm max width ok. for the 1590b..eddystone box...

the vero layout is to wide for a 1590b though so its got to be squeezed in a bit ok... ;)


@arnoud, cool, didnt think of plastic jacks..i see where your coming from now!...in 1 quad too....brilliant idea!...yep i think your version would have to be a 1590bb.....oh and no signal loss too....great!..
and yeah, do a scemo of yours too...excellent!

@yorick, cheers man, i'll take a peek when i get the time cheers ...

@all, i think arphs is going to be a nice project too guys, in fact i would make mine now without the pulse, as it drops in leve too much,
but all you have to do is just leave off that switch...sorted...waheeyyyyyyy..................

look forward to how this is all going to pan out...oh pan...lets make a stereo one :icon_mrgreen: :icon_mrgreen: :icon_mrgreen: joking...for now!. :icon_wink:
« Last Edit: March 10, 2011, 05:11:38 AM by deadastronaut »
http://www.youtube.com/user/100roberthenry
http://deadastronaut.wix.com/index

^ CHASM REVERB / TREMSHIFTER / FAZE FILTER/ABDUCTOR II DELAY pcb's + WAH LIGHT PLATES.

ronnie

Re: 'PULSEWAH'
« Reply #69 on: March 10, 2011, 05:12:19 AM »
Very cool, Thanks man,
Looking forward to it, cain't wait to make this one

tasos

Re: 'PULSEWAH'
« Reply #70 on: March 10, 2011, 06:28:22 AM »
hey...i just drawn the schem...have an eye on it before i convert that to pcb! ;)

tasos

Re: 'PULSEWAH'
« Reply #71 on: March 10, 2011, 06:29:09 AM »
hey...i just drawn the schem...have an eye on it before i convert that to pcb! ;)
http://img30.imageshack.us/i/pulsewahschem.png/

deadastronaut

Re: 'PULSEWAH'
« Reply #72 on: March 10, 2011, 06:42:05 AM »
go for it tasos!...what prog are you going to be using for pcb image?

:icon_cool: :icon_cool: :icon_cool: :icon_cool: :icon_cool:
http://www.youtube.com/user/100roberthenry
http://deadastronaut.wix.com/index

^ CHASM REVERB / TREMSHIFTER / FAZE FILTER/ABDUCTOR II DELAY pcb's + WAH LIGHT PLATES.

isildur100

Re: 'PULSEWAH'
« Reply #73 on: March 10, 2011, 06:47:22 AM »
Can't wait to build this one!

tasos

Re: 'PULSEWAH'
« Reply #74 on: March 10, 2011, 10:22:53 AM »
hey!the pcb is chaotic and the auto placement is not working properly....i will probably use another programm...i have done a pcb of the timer....
http://img843.imageshack.us/img843/8082/timerlayout.jpg
http://img143.imageshack.us/img143/6861/pcbb.jpg i have also reversed it!ready to print!

askwho69

Re: 'PULSEWAH'
« Reply #75 on: March 10, 2011, 04:09:58 PM »
GO GO GO!
"To live is to die"

ronnie

Re: 'PULSEWAH'
« Reply #76 on: March 11, 2011, 02:33:07 AM »
Awesome

gnognofasciani

  • member2
  • *
  • Posts: 52
  • Total likes: 0
  • Burn in hell you digital pedalboard!
Re: 'PULSEWAH'
« Reply #77 on: March 11, 2011, 05:09:23 AM »
Can anyone take a look if the following schematic?

I've modded depth control, wich is now on the led side, and added input and output buffers; if it is correct i can post a layout (unverified  :icon_mad:)!

If arp provides his version I can make a layout as well  ;)

Search button is your friend

~arph

Re: 'PULSEWAH'
« Reply #78 on: March 11, 2011, 05:18:48 AM »
I had a quick look, looks ok. Can't spot any errors.

I'll see if I can get a schematic together this weekend. Will do the layout myself.

deadastronaut

Re: 'PULSEWAH'
« Reply #79 on: March 11, 2011, 05:26:11 AM »
cool guys!... :icon_wink:

had lots of grief with my pc today....had to do full install...arghhhhhhhhhh..still tinkering. :icon_rolleyes:
http://www.youtube.com/user/100roberthenry
http://deadastronaut.wix.com/index

^ CHASM REVERB / TREMSHIFTER / FAZE FILTER/ABDUCTOR II DELAY pcb's + WAH LIGHT PLATES.