Tone stack help for seventheaven

[fretzburner]

I need help for my seventheaven build.I'm using 33k/470pf/22nf/22nf with treble-250KA,bass-1MA,mids-25KB
My problem is the treble CCW like mid control and CW very thin sounding.The bass control is not very effective.Changed the volume pot from audio to linear because only effective at 3/4 to full CW.
By the way i'm using goosenwerxs schematic.
Thanks

[fretzburner]

It's okay now,changed the tonestack with other values.

[JayRock]

Hey Fretz...

Where did you find the schematic for the Seventh Heaven?  I haven't had any luck tracking it down. 

I found an actual Ecstasy Preamp Schematic, but would prefer to not have to do much tweaking, since that pedal sounds sweet.

Thanks...

Jason

[deadastronaut]

me too..

i'd like to take a peek at that...

[scuzzphut]

http://www.sabrotone.com/?p=611

[deadastronaut]

schematic?...

[Ronan]

4 repeating gain stages and a cathode follower driving a FMV tone stack by the looks, shouldn't be too bad tracing a schem from the vero as most of it is repetition by a quick look.

[deadastronaut]

cheers ian, looking at vero just screws my head up.....

[Ronan]

Mate, your not the only one...same here...

[Jdansti]

Looks something like the Umble tone stack I recently built.

http://www.runoffgroove.com/umble.html

[J0K3RX]

[deadastronaut]

cheers guys; 

arghhhhhhhh trimmers again..lol..

[J0K3RX]

It's okay now,changed the tonestack with other values.

So, what values did you settle on? I am getting ready to build this one so I am curious?

[J0K3RX]

cheers guys; 

arghhhhhhhh trimmers again..lol..

I know!!! I have all my trimmers with wires soldered on them so I can set them then replace with resistors after I bias.... trimmers ain't cheap here in the US!

[J0K3RX]

BTW - Look familiar? What's different in this schematic?

[deadastronaut]

nothing different afaik..

[J0K3RX]

12AX7's, no trimmers and 250vdc plus power 

[deadastronaut]

apart from that...

[J0K3RX]

apart from that...

I think I am gonna pass on seventheaven, sounds kinda thin to me... I already built the B1 and that's about one of the best Bogner clone pedals that I have heard! lusting over Diezel now so Diefet it is!

[J0K3RX]

Anybody ever etch a board and then later on after you have it all sanded and pretty you realize that it wasn't mirrored?!?!? FUUUUUUUUUUUUU$%%$%#$@(*K!!!!!!!! Am I the only dumb @$$ on the planet!? Please tell me that somebody else has done this so I won't feel so STUPID!!!? I could be well on my way to drill ville right now but Nooooooo! Anybody in the market for a backwards Diefet? She's a beauty too lol!