Pages: [1] 2 
|
 |
|
|
Author
|
Topic: AMT Speaker/Cab simulation circuit (Read 1748 times)
|
|
J0K3RX
|
I think the AMT stomps have a very good cab simulation output! So, I was surfing around their site and stumbled upon this... I thought somebody besides myself might be interested..?  |
|
|
|
|
Logged
|
If it sounds good, then it is good...
|
|
|
deadastronaut
Posts: 6906
Rob H. LONDON
|
hi jim: if going by the other stuff the ruskies do then this should be very good!....i'm interested.  have you tried it yet?... ? where it says 1000 is that nf or pf ?...  |
|
|
|
« Last Edit: April 02, 2012, 04:45:05 AM by deadastronaut »
|
Logged
|
|
|
|
|
J0K3RX
|
hi jim: if going by the other stuff the ruskies do then this should be very good!....i'm interested. have you tried it yet?... ? where it says 1000 is that nf or pf ?... Rob, I haven't tried it, yet! But real soon... I saw the 1000 as well, I assumed it was 1uF = 1000nF? This would be a nice addition to the Spitfire!? ~Jim |
|
|
|
|
Logged
|
If it sounds good, then it is good...
|
|
|
deadastronaut
Posts: 6906
Rob H. LONDON
|
cool, i'll have to update this then...oopps and the pot values.. .  just did a layout for it....unverified obviously...   |
|
|
|
« Last Edit: April 02, 2012, 06:29:52 AM by deadastronaut »
|
Logged
|
|
|
|
|
J0K3RX
|
hi jim: if going by the other stuff the ruskies do then this should be very good!....i'm interested. have you tried it yet?... ? where it says 1000 is that nf or pf ?... Also T1 thru T4 are BFT46... Those are surface mount as far as I could find. I can do smd not a prob but I wonder if there are any subs in through hole? Damn that was fast!!! |
|
|
|
« Last Edit: April 02, 2012, 06:33:44 AM by J0K3RX »
|
Logged
|
If it sounds good, then it is good...
|
|
|
deadastronaut
Posts: 6906
Rob H. LONDON
|
i thought they would be just fets...j201's, ...etc etc...
|
|
|
|
|
Logged
|
|
|
|
|
J0K3RX
|
i thought they would be just fets...j201's, ...etc etc...
yeah, they probably would work... |
|
|
|
|
Logged
|
If it sounds good, then it is good...
|
|
|
deadastronaut
Posts: 6906
Rob H. LONDON
|
cool, might have to bread it when i get time...and a spare board ive got 3 things on the go at the mo.  i'm guessing we could swap that 300k R6 for a pot too....hmmmm...  |
|
|
|
« Last Edit: April 02, 2012, 06:38:22 AM by deadastronaut »
|
Logged
|
|
|
|
|
J0K3RX
|
I have an AMT Legend P1 which is a 5150 sim and an AMT SS-30 which is a real beast... I think I am gonna open up the P1 and see what's up.. pretty sure it's 2 sided with a combination of surface mount and through hole.. BTW - they both sound incredible!!! My Fluke meter doesn't do a real good job at checking caps...  Edit: Just opened up the P1 and there are only 3 surface mount caps on the bottom... I didn't take it completely out of the box yet but I can see one of the through hole caps from the battery compartment and it looks like they somehow smeared the writing/markings on the cap... So, I really can't read it. |
|
|
|
« Last Edit: April 02, 2012, 08:03:20 PM by J0K3RX »
|
Logged
|
If it sounds good, then it is good...
|
|
|
Ice-9
Posts: 1156
Mick T Newcastle England
|
The AMT cab sim in the Legend series P1 and S1preamp pedals isn't the same circuit as the one posted above. I have both these pedals and traced out the S1. The cab sim is the same in both pedals, although it is very similar to the one posted above it is a bit more simplified.
The pedals use 2SK208R (JR) jfets and BAT54C diodes to simulate the valve curves of the amps they are emulating.
|
|
|
|
|
Logged
|
Rebel without a clue.
|
|
|
|
J0K3RX
|
The AMT cab sim in the Legend series P1 and S1preamp pedals isn't the same circuit as the one posted above. I have both these pedals and traced out the S1. The cab sim is the same in both pedals, although it is very similar to the one posted above it is a bit more simplified.
The pedals use 2SK208R (JR) jfets and BAT54C diodes to simulate the valve curves of the amps they are emulating.
Hey Mick... You didn't happen to post your schematic in another forum did you?  |
|
|
|
|
Logged
|
If it sounds good, then it is good...
|
|
|
|
|
Ice-9
Posts: 1156
Mick T Newcastle England
|
The AMT cab sim in the Legend series P1 and S1preamp pedals isn't the same circuit as the one posted above. I have both these pedals and traced out the S1. The cab sim is the same in both pedals, although it is very similar to the one posted above it is a bit more simplified.
The pedals use 2SK208R (JR) jfets and BAT54C diodes to simulate the valve curves of the amps they are emulating.
Hey Mick... You didn't happen to post your schematic in another forum did you? Indeed I did, search AMT legend S1 (final schematic is halfway down page 2) |
|
|
|
« Last Edit: April 03, 2012, 04:45:45 AM by Ice-9 »
|
Logged
|
Rebel without a clue.
|
|
|
deadastronaut
Posts: 6906
Rob H. LONDON
|
cool, cheers mick, did you ever build it?.. i may have to try that tonestack too....hmmm... |
|
|
|
|
Logged
|
|
|
|
|
|
deadastronaut
Posts: 6906
Rob H. LONDON
|
that sounds the @#$%ing nuts.....very |
|
|
|
|
Logged
|
|
|
|
|
J0K3RX
|
that sounds the @#$%ing nuts.....very Yes Rob, PLEASE do check out the tone stack on that schematic!  I know, @#$%ing nuts!!! All of the Legend pedals have that sound pretty much!! |
|
|
|
|
Logged
|
If it sounds good, then it is good...
|
|
|
deadastronaut
Posts: 6906
Rob H. LONDON
|
@jim: i pm'd ya!... |
|
|
|
|
Logged
|
|
|
|
|
J0K3RX
|
@jim: i pm'd ya!... I pm'd ya back |
|
|
|
|
Logged
|
If it sounds good, then it is good...
|
|
|
|
|
|
Pages: [1] 2 
|
|
|
|
