AMZ FX ANALOG ALCHEMY GEOFX MEF ROG DIY WIKI

Help: Phaser 2nd knob&toggle

Started by sugonidamaso, April 16, 2012, 07:52:53 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

sugonidamaso

April 16, 2012, 07:52:53 AM
Hello everyone. Built tonepad's phaser last year. I just want to modify it.  Some of the pictures here (Picture page) have a second knob and 2 toggle switches. I just want to build them! Any layout/links would be nice.Please? Thank you ;)
" The greatest inspiration is often born out of desperation--so be DESPERATE! "

Govmnt_Lacky

#1
April 16, 2012, 08:10:16 AM
I believe that the mods you are looking for are on the TOnepad build (if you are referring to the P90)
A Veteran is someone who, at one point in his or her life, wrote a blank check made payable to The United States of America
for an amount of 'up to and including my life.'

sugonidamaso

#2
April 16, 2012, 08:17:21 AM
Thank you for your reply. Yes it is. I will read the build part. Thanks again! ;D
" The greatest inspiration is often born out of desperation--so be DESPERATE! "

sugonidamaso

#3
April 16, 2012, 08:35:14 AM
Hi. just read one of the mods. it's cool! Can you please elaborate this one mod that is written? " 3) Vibrato Mod: This mod is tricky and hard to explain. if you find info about this mod, here is a good tip for you: To make the pedal acts like a vibrato, the "speed pot" should be at its maximun speed, otherwise it would not vibe. Use a DPDT to give the "speed pot" a "0 ohm" between terminals."  ???  care to illustrate?Thanks again
" The greatest inspiration is often born out of desperation--so be DESPERATE! "
Print
Go Up Pages1
User actions