DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: heresrobert on November 17, 2012, 02:14:41 PM

Title: Help with identifying diodes
Post by: heresrobert on November 17, 2012, 02:14:41 PM
Hi,

I'm new to pedal building and I have some diodes that I'm trying to identify. One looks like a germanium. Is there any kind of chart that decodes the markings? There are three rows:

F4
00
4

Thanks for any help.

Robert
Title: Re: Help with identifying diodes
Post by: Kesh on November 17, 2012, 02:43:45 PM
there are diodes called SF4004 and VF4004
Title: Re: Help with identifying diodes
Post by: heresrobert on November 17, 2012, 04:18:36 PM
Kesh,  Thanks for your help. I appreciate it. Its starting to make some sense now. What I have are F4004, 1N4004ITT, ?4448, N1N4743A, and some tiny diodes with a green band for polarity and a green H. I can look up the numbers. Hopefully I can use them for something.

Robert
Title: Re: Help with identifying diodes
Post by: armdnrdy on November 17, 2012, 04:25:01 PM
Does it look like a little football on a stick?

http://www.google.com/search?rlz=1T4GGHP_enUS450US450&q=sf4004+diode&um=1&ie=UTF-8&hl=en&tbm=isch&source=og&sa=N&tab=wi&ei=QgCoUOWGC-XGiwL914GwCA&biw=1024&bih=605&sei=QwCoUJ_MMaXBiwLtp4HgCA
Title: Re: Help with identifying diodes
Post by: Electron Tornado on November 17, 2012, 04:48:22 PM
Quote from: heresrobert on November 17, 2012, 04:18:36 PM
Kesh,  Thanks for your help. I appreciate it. Its starting to make some sense now. What I have are F4004, 1N4004ITT, ?4448, N1N4743A, and some tiny diodes with a green band for polarity and a green H. I can look up the numbers. Hopefully I can use them for something.

Breadboard a Distortion + circuit and try out different combinations of those diodes. Take notes, see what you like best.
Title: Re: Help with identifying diodes
Post by: Kesh on November 17, 2012, 05:46:17 PM
Also, if you have a DMM take the forward voltages.
Title: Re: Help with identifying diodes
Post by: heresrobert on November 17, 2012, 07:42:00 PM
Thanks guys! 

Larry,Not like that. Its clear glass with copper innards and green labelling.  The sides are not round. I'm using my smart phone and its a pain.

Mesh, and Tornado,  good ideas. When I get home tomorrow I'll see if I can capture some voltages work on a test rig.

I'm somewhat new to these diodes. Most of my music electronic build experience is tube amps and a couple guitars.

Thanks again
and I'll post an update later on.

Robert