Text only | Text with Images

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: graylensman on May 24, 2015, 10:15:29 AM

Title: Swapping resistor values (specifically, in a Rebote 2.5)
Post by: graylensman on May 24, 2015, 10:15:29 AM
Gathering up components to populate my Rebote 2.5 board. Much to my horror, I discover I do not have 24k or 240k resistors. I do have 22k and 220K resistors.   Can these values be substituted? Thanks!
Title: Re: Swapping resistor values (specifically, in a Rebote 2.5)
Post by: mth5044 on May 24, 2015, 10:45:34 AM
It is helpful to post a link to whatever you are talking about. Those values are likely fine. And they definitely won't hurt anything.
Title: Re: Swapping resistor values (specifically, in a Rebote 2.5)
Post by: graylensman on May 24, 2015, 10:59:20 AM
Here's the schematic, BOM, and layout:

http://www.tonepad.com/getFile.asp?id=98 (http://www.tonepad.com/getFile.asp?id=98)

thanks again
Text only | Text with Images