Text only | Text with Images

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: Rambozo96 on October 05, 2018, 02:27:34 PM

Title: Adding blend control on DOD 525 Compressor/Limiter
Post by: Rambozo96 on October 05, 2018, 02:27:34 PM
Gotten a DOD Performer Compressor and want to add a blend control. I heard that some diagrams won't work if the pedal inverts the polarity (or phase). Not sure if this pedal is one of them. If so how would I go about adding a blend control?

(https://i.postimg.cc/DWLy51mX/4_A0083_C0-_A0_A4-4080-878_A-_B478_DB7_DDB2_F.jpg) (https://postimg.cc/DWLy51mX)
Title: Re: Adding blend control on DOD 525 Compressor/Limiter
Post by: Kevin Mitchell on October 05, 2018, 05:02:47 PM
Maybe I'm looking at the schematic wrong... but the level pot looks to be some sort of blend control.
Title: Re: Adding blend control on DOD 525 Compressor/Limiter
Post by: PRR on October 05, 2018, 08:57:13 PM
Level pot pans from signal to Vref, a no-signal point. It's just a level pot.

And yes, the comped path inverts. Sadly I do not see a 1-snip fix.
Text only | Text with Images