Print Page - Band of Gypsys Fuzz Face Schematic

Title: Band of Gypsys Fuzz Face Schematic
Post by: Bananagab on July 21, 2020, 04:13:59 AM

Hi guys!

I'm attempting to design a PCB layout of this fuzz and I found only two circuit designs online. One is an incomplete schematic and another is a veroboard design.

I have a hard time figuring out the missing values on the schematic from the veroboard layout, can you help me? I find it difficult to wrap my head around veroboard circuits.

(https://www.tdpri.com/data/attachments/238/238954-a857a53a607f2c67fc49d5dc079b1145.jpg)

(https://i.postimg.cc/jnc69bXT/Band-of-Gypsys-Fuzz.png) (https://postimg.cc/jnc69bXT)

Title: Re: Band of Gypsys Fuzz Face Schematic
Post by: Smeddling on July 21, 2020, 06:05:01 AM

I couldn't read the idents on the schematic image very well but
C2 220pF
C101 150pF
C102 47pF
C103 22pF
C7 1uF

Very does take a bit of getting used to but quite easy if you identify all the nodes on the schematic for that component and it leads you to it.

That's what I did ;)

Title: Re: Band of Gypsys Fuzz Face Schematic
Post by: Bananagab on July 21, 2020, 01:19:26 PM

Thank you very much!

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: Bananagab on July 21, 2020, 04:13:59 AM