hi! im using my tascam 388 for recording. It has a nice eq en nice preamps, but it doesn't have phantom power. obviously I need phantom power for a lot of microphones so i started looking for something online. im using a 8 channel mic pre with phantom at the moment, but the pre also changes my sound. You can buy a lot of phantom boxes, but nothing with 8 inputs. Is it easy to build something myself or should I maybe buy some smaller boxes and build them into a bigger 8 channel version?
any schematics are most welcome as well. also some advice. i want to switch them on or off per channel.
I could go this route
2 of those:
https://www.thomann.de/nl/millenium_pp4.htm
and then make the phantom switchable per channel. i could not find any schematic for something like this.
Quote from: FUZZZZzzzz on August 20, 2021, 06:35:34 AM
any schematics are most welcome as well.
(https://i.imgur.com/P5iVwEl.gif)
(Rod Elliott)
(https://i.imgur.com/SbrsQ1I.png)
(https://i.imgur.com/gJLEk51.png)
(Duglas Self)
I have a Conneaut Audio Devices E-200 microphone that uses phantom power but also has a provision for a pair of 9-volt NiCd batteries inside. I pulled the ones out that were in there because they were leaking. I picked it up at a garage sale for $10.