Text only | Text with Images

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: Onion Ring Modulator on December 21, 2021, 06:58:18 AM

Title: Is this the correct DPDT numbering for this project?
Post by: Onion Ring Modulator on December 21, 2021, 06:58:18 AM

(https://i.postimg.cc/0bbnvKPP/Wampler-Velvet-Fuzz.png) (https://postimg.cc/0bbnvKPP)

(https://i.postimg.cc/XZ0k92FY/Capture.png) (https://postimg.cc/XZ0k92FY)
Title: Re: Is this the correct DPDT numbering for this project?
Post by: MikeA on December 21, 2021, 09:01:56 AM
The vero numbering probably doesn't match your switch drawing, which is unconventional.  Here's a drawing for a Taiway DPDT from their data sheet, where lug 2 swings to 1 & 3 and lug 5 swings to 4 & 6.  Chances are pretty good the vero was drawn for this layout.  You could analyze your circuit to verify that. 
(https://i.postimg.cc/7bkcf2KY/DPDT-lugs.jpg) (https://postimg.cc/7bkcf2KY)
Title: Re: Is this the correct DPDT numbering for this project?
Post by: duck_arse on December 21, 2021, 09:21:14 AM
there would be a circuit diagram, wouldn't there? it wouldn't need numbers, it would actually show the connections so's you could make any switch work.
Text only | Text with Images