Text only | Text with Images

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: Deep Blue on November 22, 2003, 05:20:44 PM

Title: 3pdt/dpdt
Post by: Deep Blue on November 22, 2003, 05:20:44 PM
I'm building a simple passive looper simply by copying the wiring of one I already have.  I've done this before, and it usually works fine.

But the one I have uses a dpdt for bypass, but all I have on hand is 3pdt.  I don't mind using 3pdt, but I'm not sure how to wire it.  Can I wire it the same, but pretend one row of lugs don't exist, or something like that?  Does anyone have an article or something that would explain this to me?

Thanks.
Title: Re: 3pdt/dpdt
Post by: Peter Snowberg on November 22, 2003, 05:24:02 PM
Quote from: Deep BlueCan I wire it the same, but pretend one row of lugs don't exist, or something like that?

:D Exactly.

Since you have an extra pole on the switch now, you could also use that to switch a status LED if you wanted.

Take care,
-Peter
Title: 3pdt/dpdt
Post by: smoguzbenjamin on November 22, 2003, 05:25:43 PM
Just ignore one set :)

the whole idea is that it's just 3 simultaneous switches operated by the one stomp. Look in the beginner project forum, there's a good explanation there:

http://www.diystompboxes.com/sboxforum/viewtopic.php?t=970

this'll help  8)
Text only | Text with Images