Text only | Text with Images

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: cobainlives_05 on December 20, 2003, 06:54:35 PM

Title: It Works!!!
Post by: cobainlives_05 on December 20, 2003, 06:54:35 PM
My Electra Distortion fianally works.  The only problem is that it doesn't bypass the signal to the amp when I turn it off.  How can I change this???

RDC
Title: It Works!!!
Post by: cobainlives_05 on December 20, 2003, 08:07:14 PM
Its all picking up radio stations!!! What more could I ask for?  Its so cool.

RDC
Title: Kool..
Post by: petemoore on December 20, 2003, 08:32:39 PM
A  little EZ listening is nice through your 1 transistor reciever sometimes !!!
 Gald you got it going !!!
Title: It Works!!!
Post by: Marcos - Munky on December 20, 2003, 10:55:23 PM
For the bypass, check your switch wiring. If you wired all like the layout, there is a wire that goes to the wrong lug of the switch. For the radio, I don't know, but I think in the FAQ there is something about put a cap somewhere, take a look.
Title: It Works!!!
Post by: cobainlives_05 on December 21, 2003, 09:12:19 AM
thanks, have to go check that switch out.

RDC
Text only | Text with Images