I was looking at the PCB layout at Tonefrenzy of the TS circuit. I recently moded and subsequently destroyed a TS and I was thinking about building one from scratch. What got my attention is where the three clipping diodes are up the upper left hand corner. I was thinking what about six diodes? Not that all would be on at the same time. I was thing about three on/on/on switches. The diodes could be mounted on plug in sockets so I could experiment. What kind of combos could I get?
Snowdog
Your idea offers a good bit of versatility. I recommend some series resistors with some of the diodes. Try one 470 ohm, an 810 ohm, a 1.5k and a 10k with four of the six diodes, then try an asymetrical pair for the other two. hopefully this is food for thought...
This is what I figured might work.
GE SI 1n4001
jump jump jump
Shottky Zener LED
This way I could get a little flavor from each? But in practice maybe combos of each might be more practicle?
Snowdog