hi everyone
i finished my ultraflanger!!! well you sure can get some WACKY sounds out of this. tweaking the manual knob makes it go from pitch-bending weirdness, to a regular flange, to completely dry, and if you turn the regen knob right up it goes along making that weird flange-noise with no guitar. quality.
a few q's. there a teeny bit of distortion happening. how do i get rid of that. also how do i set the odd/even trimpots?
thanks
cheers
Jim
The odd/even trims are to set the max regen without self-oscillation -- so if you don't want the flanger noise with no input, crank the regen to max, then adjust the trim for each switch position until the self-oscillation stops.
I had a problem with distortion as well. I installed the optional 5k(TR3). I had to crank it, giving more voltage than what was reccomended. It was for the most part cleared up (still a little gain in (-) mode). I still get self-oscillation with my regeneration no matter how I adjust tr1&tr2. I just managed to get it minimized. Also, one of the modes, (-) I believe, seems a little weak to me. Depending on how/where I use the effect, the ticking isn't too bad.
aahhhhh thanks guys
cheers
Jim