Print Page - MN3102 acting up (?)

Title: MN3102 acting up (?)
Post by: ExpAnonColin on January 22, 2004, 01:02:54 AM

Is it typical to get much more AC and DC voltage out of CP1 and 2? I'm getting 4V peak to peak on CP1 and 10 on CP2. Last time I used a MN3102, I seem to remember these two outputs being identical in current and voltage... is my memory failing at such a late hour?

-Colin

Title: MN3102 acting up (?)
Post by: puretube on January 22, 2004, 01:41:06 AM

MUST both be full Vdd (10V)...

Title: MN3102 acting up (?)
Post by: ExpAnonColin on January 22, 2004, 02:21:43 AM

Quote from: puretubeMUST both be full Vdd (10V)...

That's what I remembered, and it's what the datasheet says too... wonder what's going wrong (puts on concerned face)

-Colin

Title: MN3102 acting up (?)
Post by: puretube on January 22, 2004, 02:39:13 AM

dunno what`s wrong with it; have failed yet to destroy the 3102 or 3207,
even had 12V on them...

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: ExpAnonColin on January 22, 2004, 01:02:54 AM