Text only | Text with Images

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: ExpAnonColin on January 24, 2004, 05:02:51 PM

Title: NSL 25-2khz max frequency?
Post by: ExpAnonColin on January 24, 2004, 05:02:51 PM
The datasheet says that the min fall time is 500ms... meaning 2khz, right?  Anyone tried clocking these at above 5hz or so?  You sure as heck can't get such a thing with a LED/LDR combo, at least in my experience.

-Colin
Title: NSL 25-2khz max frequency?
Post by: Arno van der Heijden on January 24, 2004, 05:45:38 PM
Not sure if this is what you mean but 500ms=0.5s.
1/0.5 would be 2hz instead of khz...
Title: NSL 25-2khz max frequency?
Post by: ExpAnonColin on January 24, 2004, 06:49:48 PM
Quote from: Arno van der HeijdenNot sure if this is what you mean but 500ms=0.5s.
1/0.5 would be 2hz instead of khz...

Shoot, you're right, that was a terrible math error on my part.

-Colin
Text only | Text with Images