Text only | Text with Images

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: gtrmac on January 29, 2004, 03:57:02 AM

Title: Millenium Bypass question
Post by: gtrmac on January 29, 2004, 03:57:02 AM
What is the best choice for a MOSFET for a MB circuit? I'm guessing BS170 or 2N7000, would this be correct?
Title: Millenium Bypass question
Post by: gtrmac on February 01, 2004, 08:44:41 PM
I'm just bumpin' this back up to see if anyone will reply.  

I can' find the specific information on the GEO article or General Guitar Gadgets. Actually the Rodent project on GGG shows a FET switch for Millenium 1 and I'm looking for the Millenium 2 part.
Title: Millenium Bypass question
Post by: Samuel on February 01, 2004, 09:42:24 PM
schematic specifically lists a 2n7000, I think
Title: Millenium Bypass question
Post by: gtrmac on February 01, 2004, 11:28:03 PM
Oops! I took another look at the GEO article and it lists BS170 or 2N7000.

Well thanks anyway for getting me to take another look.
Title: Millenium Bypass question
Post by: brett on February 01, 2004, 11:43:35 PM
Just a note to say that BS170 and 2N7000 have different pinouts (reverse of each other).  So while the BS170 faces the "top" of RG's PCB, the 2N7000 faces the bottom.  I wasted about an hour stuffing around when I first used a 2N7000 in the M2.  Weird pinouts are a pain in the arghs!
Text only | Text with Images