Hi everybody,
as some of You know, i build a RogerMayerClassicFuzz.
Is sound good in my ears, but in fact of some discussions and
Values, measured in FuzzFace Circuits, i measured (1st Time)
some Values out of my RMCF.. and like to know, if i could tweak
the circuit for more better tone.
Q1 - B=6,89/C=5,79/E=7,01 Volt
Q2 - B=5.81/C=3,91/E=5,90 Volt
once more the Values of the parts i used:
(I list the parts, i changed)
inputCap = 2,2uF
Cap at the Fuzz Pot = 10uF
removed Cap at VolumePot
10KResistor soldered parallel to the 18K at C of Q2
Its interesting for me to learn, where to change the circuit
with what effect...
Thanx for your suggestions !!
bye
Oliver