Text only | Text with Images

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: shawsofhell on February 05, 2004, 11:45:41 PM

Title: CA3094
Post by: shawsofhell on February 05, 2004, 11:45:41 PM
Hi I found a supplier near me that sells the CA3094AE chip is this the same a the one that appears in the small stone. ie will it work in a small stone
Title: ca3094ae
Post by: dr on February 06, 2004, 03:29:23 PM
....yes,it will work....I used both ca3094as as well as ae versions in the small stone clone I built...they both sound similar....I'm fond of the ae myself-its the one in the "tin can"......
Title: CA3094
Post by: Muldoer on February 06, 2004, 07:00:12 PM
If you are referring to the layout on Tonepad, no, it wont work.
Title: ca3094
Post by: dr on February 06, 2004, 08:20:43 PM
....the one I was referring to was the small stone layout in General Guitar Gadgets-it uses the CA3094;its the one I built.......
Title: CA3094
Post by: anyuser00 on April 01, 2004, 03:53:40 PM
Would you mind naming the distributor/cost :?:
Text only | Text with Images