Print Page - dynacomp compressor-- mod to ross specs?

Title: dynacomp compressor-- mod to ross specs?
Post by: tele_guitarist on February 11, 2004, 08:00:51 AM

Where can I find details on modding a dynacomp compressor to ross specs?

Title: dynacomp compressor-- mod to ross specs?
Post by: Mark Hammer on February 11, 2004, 09:38:41 AM

You can find such information at both www.geofex.com and www.tonepad.com

Title: dynacomp compressor-- mod to ross specs?
Post by: tele_guitarist on February 11, 2004, 09:54:02 AM

Quote from: Mark HammerYou can find such information at both www.geofex.com and www.tonepad.com

I thought I could, but I couldn't (and still can't) find it!

Any help appreciated.

Title: dynacomp compressor-- mod to ross specs?
Post by: Mark Hammer on February 11, 2004, 10:01:38 AM

Here: http://www.generalguitargadgets.com/v2/diagrams/geo_d&r_comp.pdf

Note that this document shows the differences between the respective circuits, but does not show you anything about the original boards. If you have any difficulties in adaptive one to be the other....well, I guess that's when you ask more questions!

Title: dynacomp compressor-- mod to ross specs?
Post by: MarkB on February 11, 2004, 10:05:58 AM

Tonepad has a document describing their Ro/Dy mod (which I did to mine)..
it's basically just switching 4 capacitors in or out of the circuit.

http://www.tonepad.com/getFileInfo.asp?id=24

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: tele_guitarist on February 11, 2004, 08:00:51 AM