Print Page - +/- 9v with wallwart using MAX1044?

Title: +/- 9v with wallwart using MAX1044?
Post by: smoguzbenjamin on February 25, 2004, 04:07:32 AM

Hey all

I was wondering, is it OK to use a wallwart (daisy chained to other pedals aswell) and a MAX1044 to get bipolar power? Are there no troublesome conseqeunces?
Cheers
Ben

Title: +/- 9v with wallwart using MAX1044?
Post by: Mike Burgundy on February 25, 2004, 05:02:45 AM

should work fine

Title: +/- 9v with wallwart using MAX1044?
Post by: smoguzbenjamin on February 25, 2004, 05:41:28 AM

cool :D

Title: +/- 9v with wallwart using MAX1044?
Post by: Hairston on February 26, 2004, 03:53:19 PM

A word of warning if not using the MAX1044 with a 9V battery, be sure to watch the voltage you are sending them, they cook very easily!

Hope this helps!
- HB

Title: +/- 9v with wallwart using MAX1044?
Post by: Tubebass on February 26, 2004, 04:09:57 PM

Quote
Hairston wrote:
A word of warning if not using the MAX1044 with a 9V battery, be sure to watch the voltage you are sending them, they cook very easily!

No kidding! I put 18v on one and toasted it....a rather expensive mistake! :oops:

Title: +/- 9v with wallwart using MAX1044?
Post by: smoguzbenjamin on February 26, 2004, 05:41:31 PM

I'll be using this so I don't have to use anything else than a 9v battery or a DC daisy chain ;) Cool, I'm expecting some samples from maxim :D

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: smoguzbenjamin on February 25, 2004, 04:07:32 AM