Text only | Text with Images

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: ED on March 20, 2004, 12:58:46 AM

Title: Ammscray! Master volume circuit
Post by: ED on March 20, 2004, 12:58:46 AM
Ammscray, would you be able to give me a site where I can find a master volume circuit to put in my Plexi? I put the master volume circuit in between the bias splitter resistors, correct?

thanks mate
ED :o
Title: Re: Ammscray! Master volume circuit
Post by: Ammscray on March 20, 2004, 06:06:40 AM
Quote from: EDAmmscray, would you be able to give me a site where I can find a master volume circuit to put in my Plexi? I put the master volume circuit in between the bias splitter resistors, correct?

thanks mate
ED :o

Here you go...this is a very good master volume that replaces the two 220K bias feed resistors in the PI...

 when the dual pot is turned up all the way, it is effectively COMPLETELY out of the circuit and the stock sound of the amp will be unaffected :)

(http://www.boomspeed.com/olympico/Fischermaster.jpg)
Title: Ammscray! Master volume circuit
Post by: aron on March 20, 2004, 02:14:18 PM
I've tried that one. It works. Off of Weber's book.

Ken has so many master volumes!
Text only | Text with Images