Text only | Text with Images

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: Ansil on March 28, 2004, 01:42:27 AM

Title: HELP.......... CAN'T FIND MARSHALL GUVNOR 2 SCHEMATIC
Post by: Ansil on March 28, 2004, 01:42:27 AM
I KNOW IT WAS IN THE SCHEMATIC TWO SECTION BUT CANT' FIND IT NOW AND I LOOKED AT ALL THE SEARCHES FRO GUVNOR ADN NO DICE

ANYONE???
Title: HELP.......... CAN'T FIND MARSHALL GUVNOR 2 SCHEMATIC
Post by: Gilles C on March 28, 2004, 06:30:06 AM
Is it very ifferent of this one?

http://www.generalguitargadgets.com/v2/diagrams/guvnor_sc.gif
Title: HELP.......... CAN'T FIND MARSHALL GUVNOR 2 SCHEMATIC
Post by: FatMike on March 28, 2004, 08:05:00 AM
Don't know if they changed the whole circuit, but the Guv'nor 2 has another control added, a "deep" control. I don't know what it does because I also couldn't find a schematic on the net (so I had to built the old one, which is not that bad, but still not that great... might be good for just playing power chords, but quite bad for palm mute stuff).

Fat Mike
Title: HELP.......... CAN'T FIND MARSHALL GUVNOR 2 SCHEMATIC
Post by: Ansil on March 28, 2004, 02:25:12 PM
yeah we had it shorlty after the jackhammer we shown to us on the forum but i can't find what i did wiht my copy.. arghhhhhhhhh

it uses another opamp too for the deep circuit..
Title: HELP.......... CAN'T FIND MARSHALL GUVNOR 2 SCHEMATIC
Post by: nooneknows on March 28, 2004, 03:48:45 PM
As far as I remember the new Guv'nor sounds pretty similar to the older one. I had both and... I sold both.
They impressed me at first sight but, using them, I found they lack a bit of life.
And the Deep control in the newer tends to muffle a lot the sound, I think it could be useful only with low wattage practice transistor amp to (try to) simulate the feel of a stack....
But it's, of course, a matter of taste.
Title: HELP.......... CAN'T FIND MARSHALL GUVNOR 2 SCHEMATIC
Post by: Ansil on March 28, 2004, 03:50:59 PM
yep i know,,  its just that i need the schematic as we used to have it on the forum but gone now,   and i need to fix one
Title: HELP.......... CAN'T FIND MARSHALL GUVNOR 2 SCHEMATIC
Post by: Prive on March 29, 2004, 05:29:51 PM
give me your e mail and i'll send a copy.

Saludos, Marcelo.
Title: HELP.......... CAN'T FIND MARSHALL GUVNOR 2 SCHEMATIC
Post by: Ansil on March 29, 2004, 06:06:54 PM
austenfantanio@yahoo.com


thanks man
i appreciate it
Title: Marshall Guvernor II and Marshall Vibratrem
Post by: Gstring on March 30, 2004, 12:00:34 AM
If anyone wants(for a reasonable price) them I have one of each that both need one control pot each-They look like new-Let me know
Title: HELP.......... CAN'T FIND MARSHALL GUVNOR 2 SCHEMATIC
Post by: Ansil on March 30, 2004, 05:51:18 AM
would you take a trade?????
Text only | Text with Images