Print Page - Sligth OT: PIC programmer

Title: Sligth OT: PIC programmer
Post by: Zero the hero on April 08, 2004, 06:00:16 AM

Hello everybody, I need a DIY PIC programmer.
I've built a simple programmer, but, although I tried EVERY single configuration in the software, it didn't worked so I thought to build something else. Everything is correct: the PCB, the components, the connections and the PICs I've tried are new and working.
I need to program PIC16F84 and PIC16F818. I use IC-Prog to download programs into the PICs.
Any link or idea?
Thanks to all!

Title: Sligth OT: PIC programmer
Post by: Maneco on April 08, 2004, 01:16:02 PM

I use the tait programmer,east to build and works with icprog...select "Tait serial programmer",confusing because it connects to the parallel port,but believe me,it works..here are some incarnations of the hardware...

http://www.volny.cz/osepie/progpar/info_c.htm

take care

Title: Sligth OT: PIC programmer
Post by: Maneco on April 08, 2004, 01:24:11 PM

also,this page is cool on pics...

http://www.finitesite.com/d3jsys/

Title: Sligth OT: PIC programmer
Post by: Gilles C on April 09, 2004, 07:49:48 AM

From memory, that's what I built and used

http://inxm.net/pictures/p16pro.gif

from

http://www.picallw.com/

It is compatible with ICPROG 1.05 software

http://www.ic-prog.com/index1.htm

Title: Sligth OT: PIC programmer
Post by: Zero the hero on April 09, 2004, 03:24:02 PM

Thanks to all, people!
I'm building a pic programmer I've found at this page: http://www.tavernier-c.com I hope that it work! I have to finish a project I've been working for 1 month...

Title: Sligth OT: PIC programmer
Post by: The Tone God on April 10, 2004, 05:08:27 PM

http://www.jdm.homepage.dk/choose.htm

Check out some of the other links from this page as well. Hope this helps.

Andrew

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: Zero the hero on April 08, 2004, 06:00:16 AM